lovemypuppystore

Why Your Washer Smells After Washing Dog Bedding

Washing machine drum with a dog bed and pet blankets ready to wash

If you wash dog beds, towels and blankets at home, your washer is doing harder work than you think. Fur, dirt, drool and the odd accident all end up in the drum. A sour or musty smell is usually the first sign the machine needs attention.

Where the smell comes from

Hair and lint collect in the drain pump filter and around the door seal. Detergent and fabric softener leave a film on the drum and hoses, and that film traps bacteria and odor. Front loaders are worse because the rubber gasket stays damp.

A simple monthly routine

  1. Check the filter. Most front loaders have a small hatch at the bottom front. Have a towel and a shallow tray ready, because water comes out.
  2. Wipe the door seal. Pull back the rubber and wipe out hair and gunk with a damp cloth.
  3. Run a cleaning cycle. Use the hottest setting, empty drum, with a washer cleaner.
  4. Leave the door open. Let it air dry between loads.

When washing pet bedding

  • Shake or vacuum fur off first, outside if you can.
  • Use hot water if the label allows.
  • Don't overload. Beds need room to move.
  • Run an extra rinse.

Questions owners ask

  • Can I use bleach? It can help, but it does not dissolve the residue film as well and some seals don't like it.
  • How often should I clean the washer? Once a month if you wash pet items weekly.
  • Does vinegar work? It can help with smell, but it's not great at breaking down detergent buildup.

We switched to pre-measured washing machine cleaner tablets once a month. They work in top-load, front-load and HE machines, and they took the guesswork out of how much powder to use. Pair that with the filter check and the smell usually goes away within a cycle or two.